Mostrar el registro sencillo del ítem
Resistencia a fuerzas de cizallamiento en sistemas cerámicos compuestos por feldespato sobre tres tipos de tratamiento del metal: estudio in vitro
dc.contributor.advisor | Aguilar Carranza, Exiomara | |
dc.contributor.author | Romero Manjarrez, Roiman Eligio | |
dc.contributor.author | Machuca Gelvis, Henderson | |
dc.contributor.author | Rico Solano, Diego Alejandro | |
dc.contributor.author | Rincon Contreras, Maria Gabriela | |
dc.date.accessioned | 2023-05-25T18:45:53Z | |
dc.date.available | 2023-05-25T18:45:53Z | |
dc.date.issued | 2023-05-25 | |
dc.identifier.citation | Romero Manjarrez, R. E. Machuca Gelvis, H. Rico Solano, D. A. Rincón Contreras, M. G. (2023). Resistencia a fuerzas de cizallamiento en sistemas cerámicos compuestos por feldespato sobre tres tipos de tratamiento del metal: estudio in vitro. [Trabajo de pregrado]. Universidad Santo Tomás. Bucaramanga, Colombia | spa |
dc.identifier.uri | http://hdl.handle.net/11634/50681 | |
dc.description | Introducción: En odontología, la resistencia a la fuerza de cizallamiento es una propiedad importante para evaluar la estabilidad de las restauraciones dentales. Los sistemas cerámicos compuestos por feldespato son ampliamente utilizados en la odontología restauradora debido a su estética y resistencia a la fractura, sin embargo, su rendimiento depende en gran medida de la calidad del sustrato metálico. Objetivo: Evaluar la influencia que tienen los diferentes tratamientos de superficies que recibe la infraestructura metálica sobre la carga de la cerámica feldespática al ser sometida a fuerzas de cizallamiento. Método: Se confeccionaron 21 cofias metálicas de níquel cromo sobre un modelo patrón del diente 26 elaborado en yeso tipo IV. Se sometieron a tres diferentes tratamientos de superficie (oxidación, arenado y pulido). Posteriormente, se recubrieron con cerámica feldespática con un espesor de 1,5 mm y se verifico visualmente la calidad de la superficie. Se llevaron a la maquina japonesa de ensayos universales presente en la sede de la universidad Santo Tomás, marca Shimadzu autograph ag-1, la cual arrojaba los parámetros de Newtons, Segundos y Milimetros para obtener los valores de ciclo, carga y recorrido, se midieron las deformaciones producidas por la aplicación de una fuerza constante usando una velocidad con una platina de sección. Se verificaron los tipos de fallas de manera visual utilizando una lupa estereoscópica lupa La información recolectada se registró en una base de datos y se analizó estadísticamente. Se evaluó normalidad (Shapiro-Wilk), seguido de Anova One-way y post test de Sidak, establenciendo nivel de significancia <0,05% Resultados: Entre los tratamientos de superficie de las cofias metálicas al cual fue adherido la cerámica feldespática, que presento mayor diferencia significativa al resistir las fuerzas de cizallamiento se tiene, el tratamiento de arenado con un promedio de 0.731 , comparado con el tratamiento de pulido el cual presento un promedio de 0,374, observándose que entre estos dos el que presento menor resistencia a carga fue el tratamiento de pulido, Para el cruce entre Carga y Tipo de tratamiento se obtuvo como resultado un valor de p = 0.03 lo que representa una diferencia estadísticamente significativa. En la variable de stroke el grupo de arenado arrojo un valor de (1,61) teniendo este una diferencia significativa sobre los grupos de oxidado y pulido todas las coronas del grupo pulido presentaron un falla adhesiva y cohesiva. Conclusiones: El grupo de tratamiento de pulido tuvo menor valor de carga, con respecto al tratamiento de arenado y oxidado. Adicionalmente la totalidad del grupo pulido presento fracasos por fallas adhesivas-cohesivas lo cual podría tener repercusiones clínicas como la delaminación en las coronas. Entre los beneficios que podemos concluir para este estudio se encuentra relacionado la importancia del comportamiento de este sistema cerámico ante las fuerzas de cizallamiento, teniendo en cuenta el tipo de tratamiento de superficie y la pureza del metal al ser recubierta con la cerámica. | spa |
dc.description.abstract | Introduction: In dentistry, shear strength resistance is an important property to evaluate the stability of dental restorations. Feldspar composite ceramic systems are widely used in restorative dentistry due to their esthetics and fracture resistance, however, their performance is highly dependent on the quality of the metal substrate. Objective: To evaluate the influence of the different surface treatments that the metal substrates receive on the loading of feldspar ceramics when subjected to shear forces. Methods: Twenty-one nickel chromium metal copings were fabricated on a standard model of tooth 26 made of type IV gypsum. They were subjected to three different surface treatments (oxidation, sandblasting and polishing). Subsequently, they were coated with feldspathic ceramic with a thickness of 1.5 mm and the surface quality was visually verified. They were taken to the Japanese universal testing machine present at the Santo Tomas University headquarters, brand Shimadzu%EF%83%92 autograph ag-1, which yielded the parameters of Newtons, Seconds and Millimeters to obtain the values of cycle, load and stroke, the deformations produced by the application of a constant force were measured using a speed with a section plate. The information collected was recorded in a data base and analyzed statistically. Normality was evaluated (Shapiro-Wilk), followed by One-way Anova and Sidak's posttest, establishing a significance level <0.05% Results: Among the surface treatments of the metallic copings to which the feldspathic ceramic was adhered, which presented the greatest significant difference in resisting shear forces, the sandblasting treatment had an average of 0.731, compared to the sandblasting treatment with an average of 0.731, compared to the sandblasting treatment with an average of 0.05%. 731, compared to the polishing treatment which presented an average of 0.374, observing that between these two, the one that presented less resistance to load was the polishing treatment. For the cross between load and type of treatment, a value of p = 0.03 was obtained as a result, which represents a statistically significant difference. In the stroke variable the sandblasting group yielded a value of (1.61) having this a significant difference over the oxidized and polished groups all crowns in the polished group presented adhesive and cohesive failure. Conclusions: The polishing treatment group had lower load value, with respect to the sandblasting and oxidized treatment. Additionally, the entire polishing group presented failures due to adhesive-cohesive failure, which could have clinical repercussions such as delamination of the crowns. Among the benefits that we can conclude for this study is related to the importance of the behavior of this ceramic system to the shearing forces, tenacity, and strength of the ceramic system, which could have clinical repercussions such as delamination of the crowns. Among the benefits that we can conclude for this study is related to the importance of the behavior of this ceramic system under shear forces, considering the type of surface treatment and the purity of the metal to be coated with the ceramic. | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.publisher | Universidad Santo Tomás | spa |
dc.rights | Atribución-NoComercial-SinDerivadas 2.5 Colombia | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.5/co/ | * |
dc.title | Resistencia a fuerzas de cizallamiento en sistemas cerámicos compuestos por feldespato sobre tres tipos de tratamiento del metal: estudio in vitro | spa |
dc.type | bachelor thesis | |
dc.description.degreename | Odontólogo | spa |
dc.publisher.program | Pregrado Odontología | spa |
dc.publisher.faculty | Facultad de Odontología | spa |
dc.subject.keyword | shear strength | spa |
dc.subject.keyword | metal-ceramic alloys | spa |
dc.subject.keyword | crowns | spa |
dc.subject.keyword | surface properties | spa |
dc.subject.keyword | dental porcelain | spa |
dc.subject.lemb | Consulta odontológica | spa |
dc.subject.lemb | Procedimientos dentales | spa |
dc.subject.lemb | Implantes dentales | spa |
dc.type.local | Tesis de pregrado | spa |
dc.rights.local | Abierto (Texto Completo) | spa |
dc.type.version | info:eu-repo/semantics/acceptedVersion | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | |
dc.coverage.campus | CRAI-USTA Bucaramanga | spa |
dc.description.domain | https://www.ustabuca.edu.co/ | spa |
dc.relation.references | Ascanio M, Camargo C, and Maldonado M. 2019. Comparación in Vitro de La Resistencia a La Fractura Ante Fuerzas Compresivas, Entre Una Restauración En Silicato de Litio Reforzado Con Zirconio Cementado Sobre Esmalte y Esmalte-Dentina En Dientes Premolares. | spa |
dc.relation.references | Blacio María. 2013. Tipos de Prótesis Para Pacientes Edéntulos Parciales y Totales. | spa |
dc.relation.references | Carrión M. 2013. Preparación de Dientes Pilares Para Coronas Superiores de Feldespato e Inferiores de Metal Porcelana. | spa |
dc.relation.references | Cordero M, Nieto C, Sayago H. 2015. “Estudio Comparativo in Vitro de Resistencia a Fuerzas de Cizallamiento de Diferentes Sistemas Ceramo-Cerámicos.” Universidad Santo Tomás, Bucaramanga. | spa |
dc.relation.references | Farzin, Mitra, Rashin Giti, and Amin Asalforush-Rezaiye. 2018. “The Effect of Multiple Firings on the Shear Bond Strength of Porcelain to a New Millable Alloy and a Conventional Casting Alloy.” Materials 11(4). doi: 10.3390/ma11040478. | spa |
dc.relation.references | Gélvez Vera, Velosa Maria, Pérez Juliana, Perez Byron. 2016. “Efecto de Las Fuerzas Oclusales Sobre El Periodonto Analizado Por Elementos Finitos.” Universitas Odontologica 35(74). doi: 10.11144/javeriana.uo35-74.efop. | spa |
dc.relation.references | Giraldo Olga. 2004. Metales y Aleaciones En Odontologia. Vol. 15. | spa |
dc.relation.references | Isabel Vásquez Hidalgo. n.d. Tipos de Estudio y Métodos de Investigación. | spa |
dc.relation.references | Isaias Anaya-Durand, Alejandro, Guillermo Israel Cauich-Segovia, and Oliver Funabazama-Bárcenas Victor Alfonso Gracia-Medrano-Bravo. 2013. Un Día Sin Fricción / One Day without Friction. Vol. 25. | spa |
dc.relation.references | Kamath, Vignesh, Mayuri Kamath, Abhinav Bhargava, Thilak Shetty, Shobha J. Rodrigues, Umesh Y. Pai, Sharon Saldanha, M. Mahesh, Puneeth Hegde, Prashant Bajantri, Sandipan Mukherjee, and Ann Sales. 2022. “An in Vitro Study on the Shear Bond Strength of Feldspathic Porcelain to Nickel Chromium Alloy and Cobalt Chromium Alloy after Various Surface Treatments.” International Journal of Dentistry 2022. doi: 10.1155/2022/2557127. | spa |
dc.relation.references | Kukiattrakoon, Boonlert. 2012. European Journal of Dentistry Optimal Acidulated Phosphate Fluoride Gel Etching Time for Surface Treatment of Feldspathic Porcelain: On Shear Bond Strength to Resin Composite. Vol. 6. | spa |
dc.relation.references | Leão, Cecília Sued, Amanda Cunha Regal de Castro, Flavio Mendonça Copello, Carlos Nelson Elias, Terumitsu Sekito Junior, and Eduardo Franzotti Sant’Anna. 2021. “Comparison of Feldspathic Veneer Surface Treatments on Ceramic Bracket SBS, ARI and Surface Roughness after Different Debonding/Polishing Methods: An in Vitro Study.” International Orthodontics 19(4):679–84. doi: 10.1016/j.ortho.2021.08.006. | spa |
dc.relation.references | Lleras, Maria. 2018. “Influencia De La Composición Química De Los Agregados En El Desempeño De La Unión Adhesiva Asfalto-Agregado.” 4–4. | spa |
dc.relation.references | Llistosella, Ramón. 2015. Estudio Experimental de La Unión Ceramo-Metálica. | spa |
dc.relation.references | Lozano, Marta Carreño. 2012a. RESISTENCIA AL CIZALLAMIENTO DE TRES SISTEMAS TOTALMENTE CERÁMICOS: ESTUDIO COMPARATIVO. | spa |
dc.relation.references | Lozano, Marta Carreño. 2012b. RESISTENCIA AL CIZALLAMIENTO DE TRES SISTEMAS TOTALMENTE CERÁMICOS: ESTUDIO COMPARATIVO. | spa |
dc.relation.references | McLean, John W. 2001. “Evolution of Dental Ceramics in the Twentieth Century.” The Journal of Prosthetic Dentistry 85(1):61–66. doi: 10.1067/mpr.2001.112545. | spa |
dc.relation.references | Mendoza j, Edna Margarita Mendéz, Astrid Lorena Valdés. 2014. “Causas de Fallas Cohesivas y Adhesivas de La Cerámica de Blindaje En La Estructura de Y-TZP: Revisión Sistemática.” 1–8. | spa |
dc.relation.references | Moses, Aghin, Lambodaran Ganesan, Sathya Shankar, and Annapoorni Hariharan. 2020. “A Comparative Evaluation of Shear Bond Strength between Feldspathic Porcelain and Lithium Di Silicate Ceramic Layered to a Zirconia Core– An in Vitro Study.” Journal of Clinical and Experimental Dentistry 12(11):e1039–44. doi: 10.4317/jced.57569 | spa |
dc.relation.references | Pantoja Borja, Pedro Estephano, Graciela María Dolores Geldres Echeverría, Diana Esmeralda Castillo Andamayo, and Martín Gilberto Quintana del Solar. 2019. “Adaptación de Cofias Cobalto-Cromo Confeccionadas Con Dos Técnicas de Colado Sobre Dos Líneas de Terminación.” Revista Estomatológica Herediana 29(2):115–27. doi: 10.20453/reh.v29i2.3528. | spa |
dc.relation.references | Requena, silvio. 2018. “Evaluación In Vitro De La Adaptación Marginale Interna De Cofias Metálicas Dealeación Cobalto Cromo(Co-Cr)Sobre Una Línea De Terminación Tipo Chamferfabricadascon Dostécnicasde Cera Perdida Coladas Por Centrifugación: Convencionalypor Inducción.” 16–17. | spa |
dc.relation.references | Reyes, CR, Cordero NM, and Sayago H. 2013. “Estudio Comparativo de Resistencia a Fuerzas de Cizallamiento de Sistemas Ceramo-Cerámicos.” | spa |
dc.relation.references | Ruales-Carrera, Edwin, Marcelo Dal Bó, Wenceslau Fernandes das Neves, Márcio Celso Fredel, Claudia Angela Maziero Volpato, and Dachamir Hotza. 2022. “Chemical Tempering of Feldspathic Porcelain for Dentistry Applications: A Review.” Open Ceramics 9. | spa |
dc.relation.references | Rus, Martínez, Pradíes Ramiro, Suárez García, Ma Jesús, Rivera Gómez, and Universidad Rey Juan Carlos Correspondencia Francisco Martínez Rus. 2007a. Cerámicas Dentales: Clasificación y Criterios de Selección Dental Ceramics: Classification and Selection Criteria. Vol. 12. | spa |
dc.relation.references | Rus, Martínez, Pradíes Ramiro, Suárez García, Ma Jesús, Rivera Gómez, and Universidad Rey Juan Carlos Correspondencia Francisco Martínez Rus. 2007b. Cerámicas Dentales: Clasificación y Criterios de Selección Dental Ceramics: Classification and Selection Criteria. Vol. 12. | spa |
dc.relation.references | Salazar, Rosario Cedeño. 2015. Estabilidad Del Color de Las Cerámicas de Disilicato de Litio. | spa |
dc.relation.references | Silva, Nelson R. F. A., Lukasz Witek, Paulo G. Coelho, Van P. Thompson, Elizabeth D. Rekow, and Jim Smay. 2011. “Additive CAD/CAM Process for Dental Prostheses.” Journal of Prosthodontics 20(2):93–96. doi: 10.1111/j.1532-849X.2010.00623.x. | spa |
dc.relation.references | Suárez-Moya, Diana Alejandra, Alberto Carlos Cruz-González, and Juan Norberto Calvo-Ramírez. 2019. “Interaction of a Universal Adhesive with Different Surface Treatments with Feldespathic Ceramics.” Saudi Dental Journal 31(3):350–54. doi: 10.1016/j.sdentj.2019.03.008. | spa |
dc.relation.references | Teodoro Rodriguez abrego, marccela lopez. 2012. “La Importancia Del Laboratorio Dental.” 1–69. | spa |
dc.relation.references | Toro, Mauricio, Alain Manuel, and Gloria Sánchez. 2019. Fracaso de Las Restauraciones Cerámicas En Base de Circonio. | spa |
dc.relation.references | Torres Duran. 2017. REHABILITACIÓN ORAL. | spa |
dc.relation.references | Vega del Barrio. 2005. “Resistencia al Cizallamiento de Un Sistematotalmente Cerámico Frente a Siete Sistemasceramo-Metálicos: Estudio Comparativo.” | spa |
dc.relation.references | Vega del Barrio, José María. 2005. “Resistencia al Cizallamiento de Un Sistema Cerámico Frente a Siete Sistemas-Metálicos: Estudio Comparativo.” 10:1–2. | spa |
dc.rights.coar | http://purl.org/coar/access_right/c_abf2 | spa |
dc.subject.proposal | Resistencia a la Cizalladura | spa |
dc.subject.proposal | Aleaciones Métalo-cerámica, | spa |
dc.subject.proposal | Coronas Dentales | spa |
dc.subject.proposal | Porcelana Dental | spa |
dc.identifier.reponame | reponame:Repositorio Institucional Universidad Santo Tomás | spa |
dc.identifier.instname | instname:Universidad Santo Tomás | spa |
dc.type.category | Formación de Recurso Humano para la Ctel: Trabajo de grado de Pregrado | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | |
dc.description.degreelevel | Pregrado | spa |
dc.identifier.repourl | repourl:https://repository.usta.edu.co | spa |
dc.type.coarversion | http://purl.org/coar/version/c_ab4af688f83e57aa | |
dc.type.drive | info:eu-repo/semantics/bachelorThesis |
Ficheros en el ítem
Este ítem aparece en la(s) siguiente(s) colección(ones)
-
Pregrado Odontología [444]