Acosta Sabogal, Iván DaríoRodriguez Murillo, Johan AlexanderUrrea Acosta, Farley2026-07-282026-07-282026-06-11Rodriguez Murillo, J, A y Urrea Acsota, F (2026), Diseño y evaluación de sistemas hidráulicos para la recolección y aprovechamiento de aguas lluvias para viviendas unifamiliares en el municipio de Villavicencio, [Trabajo de grado,Universidad Santo Tomas]. Repositorio Institucionalhttp://hdl.handle.net/11634/73567El presente trabajo de investigación desarrolla el diseño y la evaluación de un sistema hidráulico para la recolección y aprovechamiento de aguas lluvias en viviendas unifamiliares del municipio de Villavicencio. Su objetivo principal es establecer una alternativa técnica y sostenible frente al sistema convencional de abastecimiento, optimizando el uso del recurso hídrico mediante captación, almacenamiento, tratamiento y distribución del agua pluvial. Para ello, como primera parte del proyecto, se realizó un estudio hidrológico basado en información del IDEAM, analizando precipitaciones históricas y curvas IDF para determinar el caudal de diseño en dos tipos de cubiertas (a dos y cuatro aguas). Se efectuó también un análisis fisicoquímico y microbiológico del agua captada, verificando su calidad conforme a la Resolución 2115 de 2007 y al Reglamento Técnico del Sector de Agua Potable y Saneamiento Básico (RAS 2010). Con los resultados obtenidos se dimensionaron los componentes del sistema los cuales son: canales, bajantes, tanques de almacenamiento y red de distribución; así garantizando su funcionalidad hidráulica y la eficiencia del aprovechamiento pluvial. El estudio evidencia que el uso de aguas lluvias es una alternativa viable desde los puntos de vista técnico y ambiental, capaz de suplir la demanda doméstica potable y contribuir al manejo sostenible del recurso hídrico urbano. Palabras claves: Calidad del agua, precipitación, aprovechamiento de agua lluvia, captación de agua.Through the research project called "Design of Alternatives for the Rational Use of Rainwater for the Loma Linda campus of the Santo Tomás Villavicencio University", the process that was used for the alternatives of the institution's rainwater use system was shown. . As a preliminary part of the project, the study area and the different sampling points were established, with this it was possible to determine the different areas of use that will be taken into account, these are called: pavements, green areas and buildings. In this way, the hydrological data obtained from IDEAM were used to determine the amount of water that precipitates in these areas. On the other hand, the physicochemical and microbiological characterization of the water was carried out, through a sampling plan and different laboratory tests, in order to determine its quality, where the parameters specified in the RAS 2010 and the Resolution 2115 of 2007 for the results obtained. The aforementioned data were the basis for the design of said system. The second stage of this project had the purpose of designing the use model, for which the characteristics of the campus were appreciated, taking advantage of the institution's drainage works, among these ditches, downspouts and gutters that are used for collection and transport. towards the storage tank which captures a maximum daily flow of 13,604 L/s, presenting a 25.3% peak consumption at the beginning of the academic day. Finally, a compact filtration plant is established as a treatment train, since this system has the characteristics required for the minimum treatment that this water requires. This plant has filtration, dosing and disinfection characteristics, making this compact system a viable alternative in terms of economy, ease of transportation and installation, answering the question: how would rainwater be used on the Loma Linda campus? And what are the possible facilities that should be implemented for this system? Key Word- Water quality, precipitation, rainwater use, water collection..application/pdfspaAttribution-NonCommercial-NoDerivs 2.5 Colombiahttp://creativecommons.org/licenses/by-nc-nd/2.5/co/Diseño y evaluación de sistemas hidráulicos para la recolección y aprovechamiento de aguas lluvias para viviendas unifamiliares en el municipio de Villavicenciobachelor thesisHydrologyDesign FlowPrecipitationIngeniería Hidráulica - Sistemas hidráulicosAprovechamiento de aguas lluvias - Diseño de canalPrecipitación atmosférica - Agua LluviasRecolección de aguas lluviasIngeniería civil - InvestigacionesTesis y Disertaciones académicasAbierto (Texto Completo)info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2HidrologiaCaudal de DiseñoPrecipitacionreponame:Repositorio Institucional Universidad Santo Tomásinstname:Universidad Santo Tomásrepourl:https://repository.usta.edu.co