Estudio del efecto de los parámetros de impresión en las propiedades geométricas de engranajes rectos fabricados por Modelado por Deposición Fundida (FDM)

dc.contributor.advisorVelasco Peña, Marco Antoniospa
dc.contributor.authorRomero Barreto, Javierspa
dc.contributor.cvlachttp://scienti.colciencias.gov.co:8081/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0001098063spa
dc.contributor.googlescholarhttps://scholar.google.es/citations?user=tqT9rd8AAAAJ&hl=esspa
dc.coverage.campusCRAI-USTA Bogotáspa
dc.date.accessioned2020-02-19T16:12:36Zspa
dc.date.available2020-02-19T16:12:36Zspa
dc.date.issued2020-01-31spa
dc.descriptionLos engranajes rectos plásticos están usados en un sinfín de mecanismos, partiendo de juguetes, elementos didácticos de aprendizaje, mecanismos pequeños y en maquinaria industrial; además al estar realizados con polímeros reduce el costo de materiales y manufactura de manera considerable. La manufactura aditiva (AM), tiene una gran sectorización industrial en cuanto el Prototipado rápido (RP) sin embargo las aplicaciones de las tecnologías de AM en los procesos de manufactura no se han establecido en procesos industriales con respecto a engranajes rectos. Una de las tecnologías de manufactura aditiva más desarrolladas y con más investigación en la actualidad es la deposición de filamento fundido (FDM), la cual hace uso de materiales como Acrilonitrilo butadieno estireno (ABS), ácido poli láctico (PLA) o materiales propios según la compañía de la impresora. Al ser esta una de las tecnologías más accesibles y mayor catálogo de materiales según la aplicación que se requiera. Las propiedades geométricas de los engranajes rectos obtenidos por FDM no están caracterizadas, sin embargo los parámetros de impresión son cruciales al momento de mejorar la geometría de estos. Teniendo en cuanta lo anterior, el presente estudio realizado para optar el título de ingeniero mecánico de la universidad Santo Tomas, aporte conocimientos de materiales, tipos de impresión 3D, parámetros de impresión de FDM; enfocados en los engranajes rectos y cuál es el efectos de estos parámetros en las propiedades geométricas de engranajes rectos manufacturados con esta tecnología. En la primera parte del documento, se exponen materiales y trabajos relacionados con las propiedades y manufactura de engranajes rectos manufacturados por FDM. Luego se presenta el diseño experimental, especificando los factores y niveles de diseño a estudiar. Después se describe el proceso de diseño, configuración y fabricación por FDM de los engranajes establecidos en el diseño experimental. Seguidamente, se muestra las mediciones y comparaciones metrológicas aplicadas para cada una de las muestras. Finalmente, se presentas los resultados del análisis ANOVA y del análisis estadístico para cumplir con el objetivo del proyecto.spa
dc.description.abstractThe straight plastic gears are used in endless mechanisms, starting with toys, learning elements, small mechanisms and industrial machinery; in addition to being made with polymers reduces the cost of materials and manufacturing considerably. Additive manufacturing (AM), has a large industrial sectoring in terms of rapid prototyping (RP) however the applications of AM technologies in manufacturing processes have not been established in industrial processes with respect to straight gears. One of the technologies of additive manufacturing more developed and with more research at present is the deposition of molten filament (FDM), which makes use of materials such as Acrylonitrile Butadiene Styrene (ABS), polylactic acid (PLA) or own materials according to The printer company. As this is one of the most accessible technologies and largest catalog of materials according to the application required. The geometric properties of the straight gears obtained by FDM are not characterized, however the printing parameters are crucial when improving their geometry. Taking into account the foregoing, the present study conducted to qualify for the degree of mechanical engineer from the Santo Tomas University, provide knowledge of materials, types of 3D printing, FDM printing parameters; focused on straight gears and what is the effect of these parameters on the geometric properties of straight gears manufactured with this technology. In the first part of the document, materials and works related to the properties and manufacture of straight gears manufactured by FDM are exposed. Then the experimental design is presented, specifying the design factors and levels to study. Next, the design, configuration and manufacturing process by FDM of the gears established in the experimental design is described. Next, the measurements and metrological comparisons applied for each of the samples are shown. Finally, the results of the ANOVA analysis and statistical analysis are presented to meet the project objective.spa
dc.description.degreelevelPregradospa
dc.description.degreenameIngeniero Mecánicospa
dc.description.domainhttp://unidadinvestigacion.usta.edu.cospa
dc.format.mimetypeapplication/pdfspa
dc.identifier.citationRomero,J. (2020). Estudio del efecto de los parámetros de impresión en las propiedades geométricas de engranajes rectos fabricados por Modelado por Deposición Fundida (FDM) (Tesis de pregrado). Universidad Santo Tomás. Bogotá, Colombia.spa
dc.identifier.instnameinstname:Universidad Santo Tomásspa
dc.identifier.reponamereponame:Repositorio Institucional Universidad Santo Tomásspa
dc.identifier.repourlrepourl:https://repository.usta.edu.cospa
dc.identifier.urihttp://hdl.handle.net/11634/21785
dc.language.isospaspa
dc.publisherUniversidad Santo Tomásspa
dc.publisher.facultyFacultad de Ingeniería Mecánicaspa
dc.publisher.programPregrado Ingeniería Mecánicaspa
dc.relation.referencesF. A. Cruz Sanchez, H. Boudaoud, L. Muller, and M. Camargo, “Towards a standard experimental protocol for open source additive manufacturing: This paper proposes a benchmarking model for evaluating accuracy performance of 3D printers,” Virtual Phys. Prototyp., pp. 151–167, 2014.spa
dc.relation.referencesA. C. Abbott, G. P. Tandon, R. L. Bradford, H. Koerner, and J. W. Baur, “Process-structure-property effects on ABS bond strength in fused filament fabrication,” ELSEVIER, 2017spa
dc.relation.referencesK. Gupta, R. F. Laubscher, J. P. Davim, and N. K. Jain, “Recent developments in sustainable manufacturing of gears: A review,” ELSEVIER, 2016.spa
dc.relation.referencesS. K. Chaubey and N. K. Jain, “State-of-art review of past research on manufacturing of meso and micro cylindrical gears,” ELSEVIER, 2017spa
dc.relation.referencesG. Budzik and T. Dziubek, “Methodology of Increasing Accuracy of Gear Models Manufactured,” Gruyter Open, vol. 39, no. 4, 2015.spa
dc.relation.referencesM. K. Thompson et al., “Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints,” ELSEVIER, pp. 737–760, 2016.spa
dc.relation.referencesS. S. Babu, L. Love, R. Dehoff, W. Peter, T. R. Watkins, and S. Pannala, “Additive manufacturing of materials: Opportunities and challenges,” MRS Bull., vol. 40, pp. 1154–1161, 2015.spa
dc.relation.referencesY.-C. Tsai and W.-K. Jehng, “Rapid prototyping and manufacturing technology applied to the forming of spherical gear sets with skew axes,” ELSEVIER, Oct. 1999.spa
dc.relation.referencesY. Zhang, C. Purssell, K. Mao, and S. Leigh, “A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears,” ELSEVIER, 2019.spa
dc.relation.referencesQ. Chen, C. Song, C. Zhu, X. Du, and G. Ni, “Manufacturing and contact characteristics analysis of internal straight beveloid gear pair,” Mech. Mach. Theory, pp. 60–73, 2016.spa
dc.relation.referencesM. Pueo, J. Santolaria, R. Acero, and A. Gracia, “A review of tangential composite and radial composite gear inspection,” Precis. Eng., pp. 522–537, 2017.spa
dc.relation.referencesK. Dvorak, “3D model preparing for rapid prototyping by FDM method,” Int. Conf. Mech. Aerosp. Eng., vol. 8, pp. 25–29, 2017.spa
dc.relation.referencestextoscientificos, “abs,” 2017. [Online]. Available: https://www.textoscientificos.com/polimeros/abs.spa
dc.relation.referencesZORTRAX, “Z-PETG ZORTRAX,” 2015. [Online]. Available: https://zortrax.com/filaments/z-petg/.spa
dc.relation.referencesZORTRAX, “Z-NYLON ZORTRAX,” 2018. [Online]. Available: https://zortrax.com/filaments/z-nylon/.spa
dc.relation.referencesZ. S.A., “Z-HIPS FILAMENT,” 2.0, 2018. [Online]. Available: https://zortrax.com/filaments/z-hips/.spa
dc.relation.referencesF. Leyton, “Estudio y caracterización de las variables que afectan a la impresión 3D en la generación de objetos manipulables,” Esc. Univ. Cent. diseño, pp. 1–55, 2016.spa
dc.relation.referencesJ. R. C. Dizon, A. H. Espera, Q. Chen, and R. C. Advincula, “Mechanical characterization of 3D-printed polymers,” ELSEVIER, 2017.spa
dc.relation.referencesB. Pérez, H. Nykvist, A. F. Brøgger, M. B. Larsen, and M. F. Falkeborg, “Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: A review,” ELSEVIER, 2019.spa
dc.relation.referencesE. Umaras and M. S. G. Tsuzuki, “Additive Manufacturing - Considerations on Geometric Accuracy and Factors of Influence,” ELSEVIER, no. 1, 2017.spa
dc.relation.referencesMechEngineerMike, “A Practical Guide to FDM 3D Printing Gears,” online. [Online]. Available: https://www.instructables.com/id/A-Practical-Guide-to-FDM-3D-Printing-Gears/.spa
dc.relation.referencesA. Casulleras, “Estudio de diseño y construcción de una reductora con cambio de velocidad con impresora 3d,” Univ. politécnica catalunya, 2018.spa
dc.relation.referencesD. ALL3d by Pechter, “3D Printed Gears – Get the Gear That Fits Your Needs,” 17 noviembre, 2018. [Online]. Available: https://all3dp.com/2/3d-printed-gears-get-the-gear-that-fits-your-needs/.spa
dc.relation.referencesC. O. [8] Shigley, J. E., Mischke, C. R., Bocanegra, F. P., & Correa, “Diseño en ingeniería mecánica,” McGraw-Hill Interam., vol. 8, 2008.spa
dc.relation.referencesW. A. Loflin et al., “Effect of print layer height on the assessment of 3D-printed models,” TECHNO BYTES, pp. 283–289, 2019.spa
dc.relation.references3Dlink, “La importancia de la altura de capa en la Impresión 3D,” 03/05/2018, 2018. [Online]. Available: https://3dlink.me/la-importancia-de-la-altura-de-capa-en-la-impresion-3d/.spa
dc.relation.references3DWork, “Rellenos en impresión 3D,” Enero 26, 2019, 2019. [Online]. Available: https://www.3d-work.es/rellenos-en-impresion-3d/.spa
dc.relation.referencesP. Nel, M. Henao, N. Arzola, and D. Peña, “Diseño de un engranaje con perfil de diente especial bajo criterios geométricos y de resistencia a fatiga,” Ingeniería y desarrollo, vol. 35, pp. 431–451, 2017.spa
dc.relation.referencesG. E. Morales-Espejel, P. Rycerz, and A. Kadiric, “Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear,” ELSEVIER, pp. 99–115, 2017.spa
dc.relation.referencesDouglas C. Montgomery, Design and Analysis of Experiments, 2da ed., vol. 1. Limmusa Willey, 2004.spa
dc.relation.referencesT. Mikolajczyk, T. Malinowski, L. Moldovan, H. Fuwen, T. Paczkowski, and I. Ciobanu, “CAD CAM System for Manufacturing Innovative Hybrid Design Using 3D Printing,” Procedia Manuf., vol. 32, pp. 22–28, 2019.spa
dc.relation.referencesMatterhackers.com, “Zortrax M300 features.” [Online]. Available: https://www.matterhackers.com/store/l/zortrax-m300-3d-printer-fully-assembled/sk/M4631XU8.spa
dc.relation.referencesZortrax, “user guide zortrax M series,” 2018. [Online]. Available: https://support.zortrax.com/wp-content/uploads/2018/07/user_guide_zortrax_mseries_v3.pdf.spa
dc.relation.referencesJ. l. Devore, “probabilidad y estadístiaca para ingeniería y ciencias,” Quinta., ciencias e ingenieria, Ed. Mexico: 2001, 2001, pp. 480–503.spa
dc.rightsAtribución-NoComercial-SinDerivadas 2.5 Colombia*
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2
dc.rights.localAbierto (Texto Completo)spa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.5/co/*
dc.subject.keywordFDMspa
dc.subject.keywordAMspa
dc.subject.keywordManufacturespa
dc.subject.keywordGeometric propertiesspa
dc.subject.keywordPolymeric materialsspa
dc.subject.keywordMechanismsspa
dc.subject.keywordDeposition of molten filamentspa
dc.subject.keywordAdditive manufacturingspa
dc.subject.keywordMachineryspa
dc.subject.keywordEnginesspa
dc.subject.keywordManufacturesspa
dc.subject.lembMaquinariaspa
dc.subject.lembMotores (Mecánica)spa
dc.subject.lembManufacturasspa
dc.subject.proposalFDMspa
dc.subject.proposalEngranajesspa
dc.subject.proposalAMspa
dc.subject.proposalDeposición de filamento fundidospa
dc.subject.proposalManufactura aditivaspa
dc.subject.proposalGearsspa
dc.subject.proposalManufacturaspa
dc.subject.proposalPropiedades geométricasspa
dc.subject.proposalMateriales polimerosspa
dc.subject.proposalMecanismosspa
dc.titleEstudio del efecto de los parámetros de impresión en las propiedades geométricas de engranajes rectos fabricados por Modelado por Deposición Fundida (FDM)spa
dc.typebachelor thesis
dc.type.categoryFormación de Recurso Humano para la Ctel: Trabajo de grado de Pregradospa
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1f
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.driveinfo:eu-repo/semantics/bachelorThesis
dc.type.localTesis de pregradospa
dc.type.versioninfo:eu-repo/semantics/acceptedVersion

Archivos

Bloque original

Mostrando 1 - 3 de 3
Cargando...
Miniatura
Nombre:
2020javierromero.pdf
Tamaño:
3.27 MB
Formato:
Adobe Portable Document Format
Descripción:
2020javierromero
Thumbnail USTA
Nombre:
CRAIUSTA.pdf
Tamaño:
566.49 KB
Formato:
Adobe Portable Document Format
Descripción:
Carta de derechos de autor
Thumbnail USTA
Nombre:
Crai USTA carta decano.pdf
Tamaño:
31.53 KB
Formato:
Adobe Portable Document Format
Descripción:
Carata CRAI firmada por el decano

Bloque de licencias

Mostrando 1 - 1 de 1
Thumbnail USTA
Nombre:
license.txt
Tamaño:
807 B
Formato:
Item-specific license agreed upon to submission
Descripción: