Tendencias en Ingeniería de Materiales para la Fabricación de Células Solares Fotovoltaicas

Cucaita Hurtado, Oscar Giovanny.

Tendencias en Ingeniería de Materiales para la Fabricación de Células Solares Fotovoltaicas

dc.contributor.advisor	Cabeza Rojas, Iván Orlando
dc.contributor.author	Cucaita Hurtado, Oscar Giovanny.
dc.contributor.googlescholar	https://scholar.google.es/citations?user=96vN0jsAAAAJ&hl=es
dc.contributor.googlescholar	https://scholar.google.es/citations?user=96vN0jsAAAAJ&hl=es
dc.date.accessioned	2017-07-10T15:45:17Z
dc.date.available	2017-07-10T15:45:17Z
dc.date.issued	2017
dc.description	La energía solar fotovoltaica ha adquirido un importante papel a nivel global por el uso de fuentes renovables y disminución de impactos ambientales, además de ser un participe influyente en la satisfacción de la demanda energética actual. No obstante, cuenta con limitaciones como la dependencia de la disponibilidad de radiación y uso de silicio como materia prima de las células solares. Este último presenta ciertas desventajas, como complejidad en el proceso de fabricación, costos altos y menores eficiencias además de generar contaminación. En el presente artículo, se realiza una revisión de los diferentes materiales alternativos y su perspectiva de funcionamiento e implementación, exponiendo las células solares, que emplean diversos materiales dentro de los cuales se destacan las células solares de Teluro de Cadmio (CdTe) que presentan características de bajo costo y considerables eficiencias. Por otro lado, las células de CIGS (Cobre, Indio, Galio, Selenio/Azufre) presentan como característica principal el alto coeficiente Ediciones Universidad Cooperativa de Colombia - Tel. (57) 1 3323565 Ext. 1450-3 Avenida Caracas # 44-21 Primer piso 2 de adsorción; no obstante su gran reto a superar, es llevar a cabo su implementación más allá de un laboratorio, es decir a un nivel industrial y por último las células solares orgánicas con un amplio campo investigativo y gran proyección dentro del ámbito energético, además de la novedad de emplear como materiales principales polímeros con características de conductividad, y diferente estructuración y morfología a través de superposición de capas o heteruniones para el logro de altas eficiencias y bajos costos.	spa
dc.description.degreelevel	Pregrado	spa
dc.description.degreename	Ingeniero Ambiental	spa
dc.format.mimetype	application/pdf
dc.identifier.citation	Cucaita Hurtado, O. G. (2017). Tendencias en Ingeniería de Materiales para la Fabricación de Células Solares Fotovoltaicas. [Trabajo de Grado, Universidad Santo Tomás]. Repositorio Institucional.
dc.identifier.instname	instname:Universidad Santo Tomás	spa
dc.identifier.reponame	reponame:Repositorio Institucional Universidad Santo Tomás	spa
dc.identifier.repourl	repourl:https://repository.usta.edu.co	spa
dc.identifier.uri	http://hdl.handle.net/11634/3982
dc.language.iso	spa
dc.publisher	Universidad Santo Tomás	spa
dc.publisher.branch	CRAI-USTA Bogotá	spa
dc.publisher.faculty	Facultad de Ingeniería Ambiental	spa
dc.publisher.program	Pregrado de Ingeniería Ambiental	spa
dc.rights	Atribución-NoComercial-SinDerivadas 2.5 Colombia
dc.rights.accessrights	info:eu-repo/semantics/openAccess
dc.rights.coar	http://purl.org/coar/access_right/c_abf2
dc.rights.local	Abierto (Texto Completo)	spa
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/2.5/co/
dc.subject.lemb	Energía Solar
dc.subject.lemb	Materiales Fotovoltaicos
dc.subject.lemb	Células Orgánicas
dc.subject.lemb	Células CIGS
dc.subject.lemb	Células Cdte
dc.subject.proposal	Célula	spa
dc.subject.proposal	Fuente de Energía Renovable	spa
dc.subject.proposal	Ingeniería Ambiental	spa
dc.title	Tendencias en Ingeniería de Materiales para la Fabricación de Células Solares Fotovoltaicas	spa
dc.type	bachelor thesis
dc.type.coar	http://purl.org/coar/resource_type/c_7a1f
dc.type.coarversion	http://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.drive	info:eu-repo/semantics/bachelorThesis
dc.type.local	Tesis de pregrado	spa
dc.type.version	info:eu-repo/semantics/acceptedVersion
dcterms.references	C. E. Marín, “La Energía Solar Fotovoltaica En,” J. Artic., pp. 13–14, 2004
dcterms.references	A. L. N. M. I. Millán; and P. A. R. Aumente, “Investigación e impacto ambiental de los edificios. La Rnergía,” Inf. la Construcción, vol. 57, no. Figura 1, pp. 47–61, 2005.
dcterms.references	F. Ballenilla, “La sostenibilidad desde la perspectiva del agotamiento de los combustibles fósiles, un problema socio-ambiental relevante,” Investigación en la Escuela, vol. 55. pp. 73–87, 2005.
dcterms.references	L. Bird et al., “Wind and solar energy curtailment: A review of international experience,” Renew. Sustain. Energy Rev., vol. 65, pp. 577–586, 2016.
dcterms.references	L. M. Peter, “Towards sustainable photovoltaics: the search for new materials.,” Philos. Trans. A. Math. Phys. Eng. Sci., vol. 369, no. 1942, pp. 1840–1856, 2011
dcterms.references	T. Energy, “Energía Solar Solar Solar Energy,” J. Artic., vol. 83, no. Energía, pp. 561–566, 2008
dcterms.references	E. Lorenzo, “RETRATOS DE LA CONEXIÓN FOTOVOLTAICA A LA RED (IV) Seguidores y huertas solares,” Era Sol., vol. 119, no. Iv, pp. 6–23, 2004
dcterms.references	Madridsolar, “Guía de la Energía Solar,” 26, vol. 7, p. 66, 2006.
dcterms.references	C. E. L. Latunussa, F. Ardente, G. A. Blengini, and L. Mancini, “Life Cycle Assessment of an innovative recycling process for crystalline silicon photovoltaic panels,” Sol. Energy Mater. Sol. Cells, vol. 156, pp. 101–111, 2016
dcterms.references	O. Enguita, “Análisis del ciclo de vida para el desarrollo de las Reglas de Categoría de Producto de sistemas solares fotovoltaicos para la edificación,” universitat politècnica de catalunya, 2012.
dcterms.references	J. Del Río, L. Navas, and L. Sanchéz, “Análisis del ciclo de vida de un panel solar fotovoltaico empleado para la alimentación eléctrica de instalaciones de riego, comparando las metodologías ECO-Indicador 99 y EPS-2000,” p. 5, 2000
dcterms.references	W. A. Chamorro Coral and S. U. Riveros, “Celdas solares orgánicas, una perspectiva hacia el futuro.”
dcterms.references	B. W. Han, S. C. Park, J. H. Ahn, and B. T. Ahn, “Photovoltaic properties of close-space sublimated CdTe solar cells,” Sol. Energy, vol. 64, no. 1–3, pp. 49–54, 1998
dcterms.references	T. L. Chu, S. S. Chu, C. Ferekides, C. Q. Wu, J. Britt, and C. Wang, “13.4%efficient thin-film CdS/CdTe solar cells,” J. Appl. Phys., vol. 70, no. 12, 1991.
dcterms.references	M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, “Solar cell efficiency tables (version 41),” Prog. Photovoltaics Res. Appl., vol. 21, no. 1, 2013.
dcterms.references	M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, “Solar cell efficiency tables (version 40),” Prog. Photovoltaics Res. Appl., vol. 20, no. 5, 2012.
dcterms.references	President’s Advisory Council on Financial Literacy, “Annual Report,” 2008
dcterms.references	E. Regalado-Pérez, M. G. Reyes-Banda, and X. Mathew, “Influence of oxygen concentration in the CdCl2 treatment process on the photovoltaic properties of CdTe/CdS solar cells,” Thin Solid Films, vol. 582, pp. 134–138, 2015
dcterms.references	A. K. Turner et al., “Stable, high efficiency thin film solar cells produced by electrodeposition of cadmium telluride,” Sol. Energy Mater., vol. 23, no. 2–4, pp. 388–393, 1991.
dcterms.references	S. J. C. Irvine et al., “The role of transparent conducting oxides in metal organic chemical vapour deposition of CdTe/CdS Photovoltaic solar cells,” Thin Solid Films, vol. 520, no. 4, pp. 1167–1173, 2011.
dcterms.references	S. Arroyo, B. Ortiz, L. Enrique, and C. Vicentina, “Cadmio: efectos sobre la salud. Respuesta celular y molecular,” Acta Toxicológica Argentina, vol. 21, pp. 33–49, 2013
dcterms.references	J. Sites and J. Pan, “Strategies to increase CdTe solar-cell voltage,” Thin Solid Films, vol. 515, no. 15 SPEC. ISS., pp. 6099–6102, 2007
dcterms.references	R. Martin, “Células solares de teluro de cadmio logran un nuevo récord de eficiencia,” MIT Technol. Rev., 2016.
dcterms.references	J.-M. Delgado-Sanchez et al., “Front contact optimization of industrial scale CIGS solar cells for low solar concentration using 2D physical modeling,” Renew. Energy, vol. 101, pp. 90–95, 2017
dcterms.references	M. Saifullah et al., “Effect of Cu content on the photovoltaic properties of wide bandgap CIGS thin-film solar cells prepared by single-stage process,” Curr. Appl. Phys., vol. 16, no. 11, pp. 1517–1522, 2016.
dcterms.references	Y. M. Shin, C. S. Lee, D. H. Shin, H. S. Kwon, B. G. Park, and B. T. Ahn, “Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells,” Curr. Appl. Phys., vol. 15, no. 1, pp. 18–24, 2015.
dcterms.references	Y. M. Shin, D. H. Shin, J. H. Kim, and B. T. Ahn, “Effect of Na doping using Na2S on the structure and photovoltaic properties of CIGS solar cells,” Curr.Appl. Phys., vol. 11, no. 1, Supplement, pp. S59–S64, 2011
dcterms.references	J. Gutierrez Berasategui, E; Barriga, “Tecnologia CIGS para nuevas celulas solares,” Energias Renov., p. 4, 2012
dcterms.references	B. Farhadi and M. Naseri, “Structural and physical characteristics optimization of a dual junction CGS/CIGS solar cell: A numerical simulation,” Optik (Stuttg)., vol. 127, no. 21, pp. 10232–10237, 2016.
dcterms.references	J. T. Horstmann and K. F. Goser, “Monolithic integration of a silicon micromotor in combination with the CMOS drive circuit on one chip,” Microelectron. Eng., vol. 67–68, pp. 390–396, 2003.
dcterms.references	N. Espinosa and F. C. Krebs, “Life cycle analysis of organic tandem solar cells: When are they warranted?,” Sol. Energy Mater. Sol. Cells, vol. 120, no. PART B, pp. 692–700, 2014
dcterms.references	F. Martinez et al., “Classical or inverted photovoltaic cells: On the importance of the morphology of the organic layers on their power conversion efficiency,” Dye. Pigment., vol. 132, pp. 185–193, 2016.
dcterms.references	F. Meyer, “Fluorinated conjugated polymers in organic bulk heterojunction photovoltaic solar cells,” Prog. Polym. Sci., vol. 47, pp. 70–91, 2015.
dcterms.references	Y. Huang, E. J. Kramer, A. J. Heeger, and G. C. Bazan, “Bulk heterojunction solar cells: Morphology and performance relationships,” Chem. Rev., vol. 114, no. 14, pp. 7006–7043, 2014.
dcterms.references	Y. Guo et al., “Polymer solar cells with high open-circuit voltage based on novel barbell-shaped bifullerene derivative as acceptor,” Chinese J. Org. Chem., vol. 36, no. 1, pp. 172–178, 2016
dcterms.references	D. Gendron and M. Leclerc, “New conjugated polymers for plastic solar cells,” Energy Environ. Sci., vol. 4, no. 4, pp. 1225–1237, 2011.
dcterms.references	T. E. Anderson and M. E. Köse, “Impact of solution casting temperature on power conversion efficiencies of bulk heterojunction organic solar cells,” J. Photochem. Photobiol. A Chem., vol. 318, pp. 51–55, 2016.
dcterms.references	G. Chidichimo and L. Filippelli, “Organic solar cells: Problems and perspectives,” Int. J. Photoenergy, vol. 2010, 2010
dcterms.references	T. E. Anderson and M. E. Köse, “Impact of solution casting temperature on power conversion efficiencies of bulk heterojunction organic solar cells,” J. Photochem. Photobiol. A Chem., vol. 318, pp. 51–55, 2016
dcterms.references	T. Fukuda, K. Suzuki, N. Yoshimoto, and Y. Liao, “Controlled donor-accepter ratio for application of organic photovoltaic cells by alternative intermittent electrospray co-deposition,” Org. Electron., vol. 33, pp. 32–39, 2016
dcterms.references	I. Etxebarria, J. Ajuria, and R. Pacios, “Solution-processable polymeric solar cells: A review on materials, strategies and cell architectures to overcome 10%,” Org. Electron. physics, Mater. Appl., vol. 19, pp. 34–60, 2015
dcterms.references	A. Pivrikas, H. Neugebauer, and N. S. Sariciftci, “Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: A comparative review,” Sol. Energy, vol. 85, no. 6, pp. 1226–1237, 2011.
dcterms.references	P. Peumans, A. Yakimov, and S. R. Forrest, “Small molecular weight organic thin-film photodetectors and solar cells,” J. Appl. Phys., vol. 93, no. 7, pp. 3693–3723, 2003.
dcterms.references	P. Peumans, A. Yakimov, and S. R. Forrest, “Small molecular weight organic thin-film photodetectors and solar cells,” J. Appl. Phys., vol. 93, no. 7, pp. 3693–3723, 2003.5
dcterms.references	S. Sun et al., “Conjugated block copolymers for opto-electronic functions,” Synth. Met., vol. 137, no. 1–3, pp. 883–884, 2003.
dcterms.references	B. Pradhan and A. J. Pal, “Organic heterojunction photovoltaic cells: Role of functional groups in electron acceptor materials,” Sol. Energy Mater. Sol. Cells, vol. 81, no. 4, pp. 469–476, 2004.
dcterms.references	T. Stübinger and W. Brütting, “Exciton diffusion and optical interference in organic donor-acceptor photovoltaic cells,” J. Appl. Phys., vol. 90, no. 7, pp. 3632–3641, 2001
dcterms.references	Q. An et al., “Improved Efficiency of Bulk Heterojunction Polymer Solar Cells by Doping Low Bandgap Small Molecule.,” ACS Appl. Mater. Interfaces, vol. 186, no. August 2016, pp. 161–164, 2014.
dcterms.references	H. Zhao, Jingbo and Li, Yunke and Yang, Goufang and Jiang, Kui and Li, Haroan and Ade, Harald and Ma, Wei and Ya, “Efficient organic solar cells processed from hydrocarbon solvents,” Nat. Energy, vol. 1, pp. 15–27, 2016.
dcterms.references	A. Kovalenko et al., “Towards improved efficiency of bulk-heterojunction solar cells using various spinel ferrite magnetic nanoparticles,” Org. Electron., vol. 39, pp. 118–126, 2016.
dcterms.references	P. Fan, Y. Zheng, D. Zheng, and J. Yu, “Improved efficiency of bulk heterojunction polymer solar cells by doping with iridium complex,” Mater. Lett., vol. 186, pp. 161–164, 2017.
dcterms.references	L. Lu, T. Xu, W. Chen, E. S. Landry, and L. Yu, “Ternary blend polymer solar cells with enhanced power conversion efficiency,” Nat. Photonics, vol. 8, no. 9, pp. 716–722, 2014
dcterms.references	A. Mhamdi, W. Boukhili, M. Raissi, M. Mahdouani, L. Vignau, and R. Bourguiga, “Simulation and optimization of the performance of organic photovoltaic cells based on capped copolymers for bulk heterojunctions,” Superlattices Microstruct., vol. 96, pp. 241–252, 2016
dcterms.references	C. J. Brabec, “Organic photovoltaics: Technology and market,” Sol. Energy Mater. Sol. Cells, vol. 83, no. 2–3, pp. 273–292, 2004.
dcterms.references	R. C. Pasquali, D. A. Chiappetta, and C. Bregni, “Los Copol í meros en Bloques Anfif í licos y sus Aplicaciones Farmac é uticas,” vol. 24, no. 4, 2005.
dcterms.references	N. Sary et al., “A new supramolecular route for using rod-coil block copolymers in photovoltaic applications,” Adv. Mater., vol. 22, no. 6, pp. 763– 768, 2010
dcterms.references	C. Yang, J. K. Lee, A. J. Heeger, and F. Wudl, “Well-defined donor-acceptor rod-coil diblock copolymers based on P3HT containing C60: The morphology and role as a surfactant in bulk-heterojunction solar cells,” J. Mater. Chem., vol. 19, no. 30, pp. 5416–5423, 2009.
dcterms.references	F. Liu, Y. Gu, X. Shen, S. Ferdous, H. W. Wang, and T. P. Russell, “Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics,” Prog. Polym. Sci., vol. 38, no. 12, pp. 1990–2052, 2013.
dcterms.references	F. Liu, Y. Gu, J. W. Jung, W. H. Jo, and T. P. Russell, “On the morphology of polymer-based photovoltaics,” J. Polym. Sci. Part B Polym. Phys., vol. 50, no. 15, pp. 1018–1044, 2012
dcterms.references	L.-M. Chen, Z. Hong, G. Li, and Y. Yang, “Recent progress in polymer solar cells: Manipulation of polymer: Fullerene morphology and the formation of efficient inverted polymer solar cells,” Adv. Mater., vol. 21, no. 14–15, pp. 1434–1449, 2009.
dcterms.references	K. M. Coakley and M. D. McGehee, “Conjugated polymer photovoltaic cells,” Chem. Mater., vol. 16, no. 23, pp. 4533–4542, 2004
dcterms.references	M. A. Ruderer, E. Metwalli, W. Wang, G. Kaune, S. V Roth, and P. Müller Buschbaum, “Thin films of photoactive polymer blends,” ChemPhysChem, vol. 10, no. 4, pp. 664–671, 2009
dcterms.references	H. Hoppe and N. S. Sariciftci, “Morphology of polymer/fullerene bulk heterojunction solar cells,” J. Mater. Chem., vol. 16, no. 1, pp. 45–61, 2006
dcterms.references	D. M. Stoltzfus et al., “Improved efficiency of polymer-fullerene bulk heterojunction solar cells by the addition of Cu(II)-porphyrin-oligothiophene conjugates,” Synth. Met., vol. 218, pp. 1–8, 2016
dcterms.references	A. L. Fagua and W. F. B. S, “Celdas Solares Orgánicas Organic Solar Cells Células solares orgânicas,” vol. II, pp. 71–81, 2015