Development of a platform using hardware in the loop technique to validate the dynamic behavior of a coupled-inductor buck-boost dc/dc converter

Vista sencilla de ítem
dc.contributor.advisorTorres Pinzón, Carlos Andrés
dc.contributor.advisorMojica Casallas, Carlos Javier
dc.contributor.advisorRamírez Murillo, Harrynson
dc.contributor.authorNavarrete Gómez, Jhon Erik
dc.contributor.cvlachttp://scienti.colciencias.gov.co:8081/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0000692670
dc.contributor.cvlachttp://scienti.colciencias.gov.co:8081/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0000639214
dc.contributor.cvlachttp://scienti.colciencias.gov.co:8081/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0001614550
dc.contributor.googlescholarhttps://scholar.google.es/citations?user=gMAr7YEAAAAJ&hl=es
dc.contributor.googlescholarhttps://scholar.google.com/citations?user=r9kpTz0AAAAJ&hl=es
dc.contributor.orcidhttps://orcid.org/0000-0003-0367-8143
dc.contributor.orcidhttps://orcid.org/0000-0002-3757-9410
dc.date.accessioned2021-02-02T19:32:47Z
dc.date.available2021-02-02T19:32:47Z
dc.date.issued2021-01-29
dc.descriptionExplicado brevemente, el modelado de sistemas es un intercambio equivalente de variables como Velocidad, precisión y esfuerzo. Al modelar un sistema, es posible que tengamos que elegir dos de estos tres atributos, dejando un lado. Un modelo con un nivel superior de precisión y velocidad siempre requerirá un esfuerzo impresionante. Lo contrario es raro. Este proyecto de investigación implementará un modelo en una plataforma Hardware in the Loop que permita mejorar los tiempos de diseño e implementación de los prototipos de Power Electronics.spa
dc.description.abstractBriefly explained, systems modeling is an equivalent exchange of variables such as Speed, precision and effort. When modeling a system, we may have to choose two of these three attributes, leaving one side. A model with a top level of precision and speed will always require an impressive deal of effort. The opposite is rare. This research project will implement a model on a Hardware in the Loop platform that allows improving the design and implementation times of Power Electronics prototypes.spa
dc.description.degreelevelMaestríaspa
dc.description.degreenameMagister en Ingeniería Electrónicaspa
dc.description.domainhttp://unidadinvestigacion.usta.edu.cospa
dc.format.mimetypeapplication/pdf
dc.identifier.citationNavarrete Gómez, J. E. (2020). Development of a platform using hardware in the loop technique to validate the dynamic behavior of a coupled-inductor buck-boost dc/dc converter [Tesis de Maestría en Ingeniería Electrónica, Universidad Santo Tomás] Repositorio Institucionalspa
dc.identifier.instnameinstname:Universidad Santo Tomásspa
dc.identifier.reponamereponame:Repositorio Institucional Universidad Santo Tomásspa
dc.identifier.repourlrepourl:https://repository.usta.edu.cospa
dc.identifier.urihttp://hdl.handle.net/11634/31764
dc.language.isospa
dc.publisherUniversidad Santo Tomásspa
dc.publisher.branchCRAI-USTA Bogotáspa
dc.publisher.facultyFacultad de Ingeniería Electrónicaspa
dc.publisher.programMaestría Ingeniería Electrónicaspa
dc.relation.referencesD. Biel, F. Guinjoan, E. Fossas, and J. Chavarria, “Sliding-mode control design of a boost-buck switching converter for AC signal generation,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 51, no. 8, pp. 1539–1551, Aug. 2004, ISSN: 10577122. DOI: 10.1109/TCSI. 2004.832803.spa
dc.relation.referencesJ. Chen, D. Maksimovi´c, and R. W. Erickson, “Analysis and design of a low-stress buck-boost converter in universal-input PFC applications,” IEEE Transactions on Power Electronics, vol. 21, no. 2, pp. 320–329, Mar. 2006, ISSN: 08858993. DOI: 10.1109/TPEL.2005.869744.spa
dc.relation.referencesM. Gaboriault and A. Notman, “A high efficiency, non-inverting, buck-boost DC-DC converter,” in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, vol. 3, 2004, pp. 1411–1415. DOI: 10.1109/apec.2004.1296049.spa
dc.relation.referencesP. C. Huang, W. Q. Wu, H. H. Ho, and K. H. Chen, “Hybrid buckboost feedforward and reduced average inductor current techniques in fast line transient and high-efficiency buckboost converter,” IEEE Transactions on Power Electronics, vol. 25, no. 3, pp. 719–730, 2010, ISSN: 08858993. DOI: 10.1109/TPEL.2009.2031803.spa
dc.relation.referencesB. Sahu and G. A. Rincon-Mora, “A low voltage, dynamic, noninverting, synchronous buckboost converter for portable applications,” IEEE Transactions on Power Electronics, vol. 19, no. 2, pp. 443–452, Mar. 2004, ISSN: 08858993. DOI: 10.1109/TPEL.2003.823196.spa
dc.relation.referencesY. J. Lee, A. Khaligh, and A. Emadi, “A compensation technique for smooth transitions in a noninverting buck-boost converter,” IEEE Transactions on Power Electronics, vol. 24, no. 4, pp. 1002–1015, 2009, ISSN: 08858993. DOI: 10.1109/TPEL.2008.2010044.spa
dc.relation.referencesY. J. Lee, A. Khaligh, A. Chakraborty, and A. Emadi, “Digital Combination of Buck and Boost Converters to Control a Positive Buck-Boost Converter and Improve the Output Transients,” IEEE Transactions on Power Electronics, vol. 24, no. 5, pp. 1267–1279, 2009, ISSN: 19410107. DOI: 10.1109/TPEL.2009.2014066.spa
dc.relation.referencesE. Schaltz, P. O. Rasmussen, and A. Khaligh, “Non-inverting buck-boost converter for fuel cell applications,” in IECON Proceedings (Industrial Electronics Conference), IEEE Computer Society, 2008, pp. 855–860, ISBN: 9781424417667. DOI: 10.1109/IECON.2008.4758065.spa
dc.relation.referencesJ. K. Shiau, C. J. Cheng, and C. E. Tseng, “Stability analysis of a non-inverting synchronous buck-boost power converter for a solar power management system,” in 2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008, 2008, pp. 263–268, ISBN: 9781424418886. DOI: 10.1109/ICSET.2008.4747014.spa
dc.relation.referencesO. Mourra, A. Fernandez, and F. Tonicello, “Buck boost regulator (B2R) for spacecraft solar array power conversion,” in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, 2010, pp. 1313–1319, ISBN: 9781424447824. DOI: 10.1109/APEC.2010. 5433399.spa
dc.relation.referencesS. Waffler and J. W. Kolar, “A Novel Low-Loss Modulation Strategy for High-Power Bidirectional Buck + Boost Converters,” IEEE Transactions on Power Electronics, vol. 24, no. 6, pp. 1589–1599, 2009, ISSN: 19410107. DOI: 10.1109/TPEL.2009.2015881.spa
dc.relation.referencesX. Ren, X. Ruan, H. Qian, M. Li, and Q. Chen, “Three-mode dual-frequency two-edge modulation scheme for four-switch buck-boost converter,” IEEE Transactions on Power Electronics, vol. 24, no. 2, pp. 499–509, 2009, ISSN: 08858993. DOI: 10.1109/TPEL.2008.2005578.spa
dc.relation.referencesD. M. Sable, B. H. Cho, and R. B. Ridley, “Elimination of the positive zero in fixed frequency boost and flyback converters,” in Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition, 1990, pp. 205–211. DOI: 10.1109/APEC.1990.66413.spa
dc.relation.referencesWei-Chung Wu, R. M. Bass, and J. R. Yeargan, “Eliminating the effects of the right-half plane zero in fixed frequency boost converters,” in PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196), vol. 1, May 1998, 362–366 vol.1. DOI: 10.1109/PESC.1998.701924.spa
dc.relation.referencesS.-K. E., F. A., M. E., E. J.B., E. V., C. J., and G. A., “Bidirectional High-Power High-Efficiency non-isolated step-up DC-DC Converter,” 2003.spa
dc.relation.referencesJ. Calvente, L. Martinez-Salamero, H. Valderrama, and E. Vidal-Idiarte, “Using magnetic coupling to eliminate right half-plane zeros in boost converters,” IEEE Power Electronics Letters, vol. 2, no. 2, pp. 58–62, 2004, ISSN: 15407985. DOI: 10.1109/LPEL.2004.834615.spa
dc.relation.referencesB. Poorali and E. Adib, “Right-Half-Plane Zero Elimination of Boost,” vol. 66, no. 11, pp. 8454– 8462, 2019.spa
dc.relation.referencesC. Restrepo, J. Calvente, A. Cid-Pastor, A. El Aroudi, and R. Giral, “A noninverting buck-boost dc-dc switching converter with high efficiency and wide bandwidth,” IEEE Transactions on Power Electronics, vol. 26, no. 9, pp. 2490–2503, 2011, ISSN: 08858993. DOI: 10.1109/TPEL. 2011.2108668.spa
dc.relation.referencesC. Restrepo, S. Member, J. Calvente, A. Romero, E. Vidal-idiarte, R. Giral, and S. Member, “Current-Mode Control of a Coupled-Inductor Buck – Boost DC – DC Switching Converter,” vol. 27, no. 5, pp. 2536–2549, 2012.spa
dc.relation.referencesJ. Calvente, L. Martínez-Salamero, P. Garcés, and A. Romero, “Zero Dynamics-Based Design of Damping Networks for Switching Converters,” IEEE Transactions on Aerospace and Electronic Systems, vol. 39, no. 4, pp. 1292–1303, 2003, ISSN: 00189251. DOI: 10.1109/TAES.2003. 1261129.spa
dc.relation.referencesC. Restrepo, T. Konjedic, J. Calvente, M. Milanoviˇc, and R. Giral, “Fast transitions between current control loops of the coupled-inductor buck-boost DC-DC switching converter,” IEEE Transactions on Power Electronics, vol. 28, no. 8, pp. 3648–3652, 2013, ISSN: 08858993. DOI: 10.1109/TPEL.2012.2231882.spa
dc.relation.referencesM. N. Alexander, Charles K. and Sadiku, Fundamentals of Electric Circuits, Fifth Edit. Cleveland, Ohio: McGraw-Hill, 2013, p. 905, ISBN: 978-0-07-338057-5.spa
dc.relation.referencesZ. Zhang, “Coupled-Inductor Magnetics,” Ph.D. dissertation, California Institute of Technology, 1987, p. 243.spa
dc.relation.referencesM. A. Mannah, A. Haddad, and H. Bazzi, “Hardware in the loop simulation for optimal management of electrical power converters,” 2014 International Conference on Renewable Energies for Developing Countries, REDEC 2014, pp. 43–48, 2014. DOI: 10.1109/REDEC.2014.7038529.spa
dc.relation.referencesW. Ren, M. Steurer, and S. Woodruff, “Progress and challenges in real time hardware-in-the loop simulations of integrated ship power systems,” 2005 IEEE Power Engineering Society General Meeting, vol. 1, pp. 534–537, 2005. DOI: 10.1109/pes.2005.1489721.spa
dc.relation.referencesA. Monti, H. Figueroa, S. Lentijo, X. Wu, and R. Dougal, “Interface issues in hardware-in-theloop simulation,” 2005 IEEE Electric Ship Technologies Symposium, vol. 2005, pp. 39–44, 2005. DOI: 10.1109/ESTS.2005.1524650.spa
dc.relation.referencesZ. Jiang, R. A. Dougal, R. Leonard, H. Figueroa, and A. Monti, “Hardware-in-the-loop testing of digital power controllers,” Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, vol. 2006, pp. 901–906, 2006. DOI: 10.1109/apec.2006.1620645.spa
dc.relation.referencesB. Lu, X. Wu, H. Figueroa, and A. Monti, “A low-cost real-time hardware-in-the-loop testing approach of power electronics controls,” IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 919–931, 2007, ISSN: 02780046. DOI: 10.1109/TIE.2007.892253.spa
dc.relation.referencesJ. Wu, Y. Cheng, A. K. Srivastava, N. N. Schulz, and H. L. Ginn, “Hardware in the Loop test for power system modeling and simulation,” 2006 IEEE PES Power Systems Conference and Exposition, PSCE 2006 - Proceedings, pp. 1892–1897, 2006. DOI: 10.1109/PSCE.2006. 296201.spa
dc.relation.referencesM. Steurer, F. Bogdan, W. Ren, M. Sloderbeck, and S. Woodruff, “Controller and power hardware-in-loop methods for accelerating renewable energy integration,” 2007 IEEE Power Engineering Society General Meeting, PES, pp. 44–47, 2007. DOI: 10.1109/PES.2007.386022.spa
dc.relation.referencesL. A. Gregoire, K. Al-Haddad, and G. Nanjundaiah, “Hardware-in-the-Loop (HIL) to reduce the development cost of power electronic converters,” India International Conference on Power Electronics, IICPE 2010, 2011. DOI: 10.1109/IICPE.2011.5728153.spa
dc.relation.referencesM. Lemaire, P. Sicard, and J. Belanger, “Prototyping and Testing Power Electronics Systems Using Controller Hardware-In-the-Loop (HIL) and Power Hardware-In-the-Loop (PHIL) Simulations,” 2015 IEEE Vehicle Power and Propulsion Conference, VPPC 2015 - Proceedings, pp. 2–7, 2015. DOI: 10.1109/VPPC.2015.7353000.spa
dc.rightsAtribución-NoComercial-SinDerivadas 2.5 Colombia
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2
dc.rights.localAbierto (Texto Completo)spa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.5/co/
dc.subject.keywordHardware in the loopspa
dc.subject.keywordPower electronicsspa
dc.subject.keywordRenewable energy systemsspa
dc.subject.keywordElectric inductorsspa
dc.subject.keywordElectronic data processingspa
dc.subject.lembSistemas embebidosspa
dc.subject.lembInductores eléctricosspa
dc.subject.lembProcesamiento electrónico de datosspa
dc.subject.proposalLabVIEWspa
dc.subject.proposalHardware in the loopspa
dc.subject.proposalSistemas de energía renovablespa
dc.titleDevelopment of a platform using hardware in the loop technique to validate the dynamic behavior of a coupled-inductor buck-boost dc/dc converterspa
dc.typemaster thesis
dc.type.categoryFormación de Recurso Humano para la Ctel: Trabajo de grado de Maestríaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_bdcc
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.driveinfo:eu-repo/semantics/masterThesis
dc.type.localTesis de maestríaspa
dc.type.versioninfo:eu-repo/semantics/acceptedVersion

Archivos

Bloque original

Mostrando 1 - 4 de 4
Miniatura
Nombre:
2020jhonnavarrete.pdf
Tamaño:
2.45 MB
Formato:
Adobe Portable Document Format
Descripción:
Descargar
Miniatura
Nombre:
Carta_aprobacion_facultad_Jhon_Navarrete.pdf
Tamaño:
129.86 KB
Formato:
Adobe Portable Document Format
Descripción:
Carta de Aprobación Facultad
Descargar
Miniatura
Nombre:
Carta Autorizacion para Datos Personales.pdf
Tamaño:
216.39 KB
Formato:
Adobe Portable Document Format
Descripción:
Carta de Autorización
Descargar
Miniatura
Nombre:
Carta_Autorizacion.pdf
Tamaño:
284.83 KB
Formato:
Adobe Portable Document Format
Descripción:
Carta Autorización CRAI
Descargar

Bloque de licencias

Mostrando 1 - 1 de 1
Miniatura
Nombre:
license.txt
Tamaño:
807 B
Formato:
Item-specific license agreed upon to submission
Descripción:
Descargar

Colecciones

Maestría Ingeniería Electrónica