Implementación de un dispositivo para la adquisición, almacenamiento y transmisión de datos de una red de sensores inalámbricos para aplicaciones agrícolas; a través de tecnología móvil celular
Cargando...
Fecha
2014
Director
Enlace al recurso
DOI
ORCID
Google Scholar
Cvlac
gruplac
Descripción Dominio:
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Santo Tomás
Compartir
Documentos PDF
Cargando...
Resumen
En este proyecto se presenta el desarrollo de un sistema que cumple las funciones de adquisición, almacenamiento y transmisión de datos en una red inalámbrica de sensores bajo la condición que dicho dispositivo transmita esos datos por medio de la red de telefonía móvil celular; específicamente utilizando GPRS (General Packet Radio Service).
El sistema se basa en la selección e integración de varios dispositivos de hardware y software abierto y que cumpla con la principal característica que en este caso sería el bajo consumo de energía.
Este dispositivo está en capacidad de recibir la información que llega de una red de sensores implementada para aplicaciones agrícolas, actuando como el nodo coordinador de la red por medio del uso de la tecnología Zigbee. También debe procesar y almacenar esa información que será transmitida por el módulo GSM/GPRS Shield de Arduino hacia un servicio web que fue implementado por las personas que desarrollan este proyecto.
El proyecto también consta de una página web que ofrece acceso como administrador y/o como invitado para consultar el registro de la información que llega a la base de datos que se encuentra en el Hosting.
Para las pruebas de funcionamiento del dispositivo se implementa una pequeña red de sensores con dos nodos físicos y tres nodos simulados por software; verificando que recibe los datos correspondientes a las variables, se envían esos datos por la red móvil celular a la base de datos que se encuentra en el Web Hosting y se muestra una representación gráfica de los datos que se están midiendo con los sensores.
Abstract
This project presents the development of a system that fulfills the functions of data acquisition, storage and transmission in a wireless sensor network under the condition that said device transmits that data through the cellular mobile telephone network; specifically using GPRS (General Packet Radio Service).
The system is based on the selection and integration of several open hardware and software devices and that meets the main feature that in this case would be low power consumption.
This device is capable of receiving the information that arrives from a sensor network implemented for agricultural applications, acting as the coordinating node of the network through the use of Zigbee technology. You must also process and store that information that will be transmitted by the Arduino GSM / GPRS Shield module to a web service that was implemented by the people who develop this project.
The project also consists of a web page that offers access as an administrator and / or as a guest to consult the record of the information that arrives at the database that is in the Hosting.
A small network of sensors with two physical nodes and three nodes simulated by software is implemented for device function tests; verifying that it receives the data corresponding to the variables, that data is sent by the cellular mobile network to the database found in the Web Hosting and a graphic representation of the data being measured with the sensors is shown.
Idioma
spa
Palabras clave
Citación
Conrado Escudero, J. J. Hernández Bruges, J. D. (2014). Implementación de un dispositivo para la adquisición, almacenamiento y transmisión de datos de una red de sensores inalámbricos para aplicaciones agrícolas; a través de tecnología móvil celular. [Trabajo de pregrado]. Universidad Santo Tomás, Bucaramanga, Colombia.
Colecciones
Licencia Creative Commons
Atribución-NoComercial-SinDerivadas 2.5 Colombia