Pasantía hormigón urbano S.A.S
Cargando...
Fecha
2017-10-01
Autores
Director
Enlace al recurso
DOI
ORCID
Google Scholar
Cvlac
gruplac
Descripción Dominio:
Título de la revista
ISSN de la revista
Título del volumen
Editor
Compartir
Documentos PDF
Cargando...
Resumen
El presente informe pretende dar a conocer el trabajo realizado en la modalidad de pasantía durante el convenio instaurado con la empresa HORMIGÒN URBANO S.A.S. y la Universidad Santo Tomas durante el periodo comprendido entre el 23 de marzo y el 24 de junio del año en curso, con un total de 600 horas cumpliendo con los objetivos propuestos entre el estudiante y la empresa, desarrollando actividades planteadas en las que se puso a prueba el conocimiento adquirido durante mi vida académica en la institución ejerciendo el cargo de Auxiliar de Ingeniería a cargo del sistema de gestión de calidad del concreto.
Las actividades que desarrolle en mi trabajo se basan principalmente en el control de calidad que se hace al concreto, por medio de los ensayos reglamentarios estipulados en la Norma Técnica Colombiana (NTC), dichos ensayos se realizan para obtener un registro en el control de calidad del concreto, entre los cuales se encuentran la prueba de asentamiento estipulado en la NTC 396 “Ensayo de asentamiento del concreto”, posteriormente se elaboran los cilindros de concreto mediante la guía de la norma NTC 550 “Elaboración y curado de especímenes de concreto en obra” para realizar el ensayo de resistencia a la compresión el cual se realiza en el laboratorio de CONTECON URBAN, los datos administrados por el laboratorio se analizaban para identificar si existía algún problema en el curado de los especímenes llevando un control el cual es enviado cada 8 dais con el respectivo análisis al departamento de calidad de la empresa HORMIGÒN HURBANO S.A.S.
El proceso de seguimiento a la calidad del concreto permite verificar a la planta que el concreto despachado hacia la obra cumple con los requerimientos mínimos de elaboración, transporte y suministro.
Abstract
The present report intends to make known the work carried out in the form of internship during the agreement established with the company HORMIGÒN URBANO S.A.S. And Santo Tomas University during the period from March 23 to June 24 of the current year, with a total of 600 hours meeting the proposed objectives between the student and the company, developing activities in which it was put To test the knowledge acquired during my academic life in the institution exercising the position of Engineering Assistant in charge of the system of quality management of concrete. The activities carried out in my work are based mainly on the quality control that is done to the concrete, through the regulatory tests stipulated in the Colombian Technical Standard (NTC), these tests are carried out to obtain a record in the quality control Of the concrete, among which are the settlement test stipulated in NTC 396 "Testing of concrete settlement", then the concrete cylinders are elaborated through the guidance of the standard NTC 550 "Elaboration and curing of concrete specimens on site "In order to perform the compressive strength test carried out in the CONTECON URBAN laboratory, the data administered by the laboratory were analyzed to identify if there was any problem in the curing of the specimens by carrying a control which is sent every 8 Give with the respective analysis to the quality department of the company HORMIGÒN HURBANO S.A.S. The process of monitoring the quality of the concrete allows to verify to the plant that the concrete dispatched to the work complies with the minimum requirements of elaboration, transport and supply.
Idioma
Palabras clave
Citación
Barrera, C. (2017) Pasantía hormigón urbano S.A.S. Tesis de pregrado. Universidad Santo Tomás Tunja.
Colecciones
Licencia Creative Commons
Atribución-NoComercial-SinDerivadas 2.5 Colombia