Apoyo como pasante en la supervisión y construcción de placa huellas en el municipio de Tunja

Abstract

The development of this internship was carried out in the villages behind the Alto and La Germania of the municipality of Tunja department of Boyacá for a period of approximately 4 months, in the mayor's office of the city of Tunja in the infrastructure area, during these months it was carried out the construction of footprints plate in the aforementioned sidewalks, where the intern put his knowledge to the test in terms of calculation and cost of materials, labor, preparation of reports, use of established norms for the construction of footprint plate, The construction of a footprint plate of approximately 95 linear meters was executed, located on the sidewalk behind the hill, following the INVIAS standard, chapter of construction of footprint plate, in the first instance the topography is carried out, the road section is marked and the beginning When profiling and excavating it, the ground is prepared with a granular sub-base of 15 centimeters thick as stipulated by the standard and then taking tests of humidity and densities, after completing the steps mentioned above, we proceed to follow the steps constructives for footprint plate. As are the excavation of braces tied to steel formwork for footprints and cyclopees etc. During this process, compression tests are carried out on the cylinders to verify that the concretes comply with the strengths stipulated by the standard. For the construction of the footprint plate located on the sidewalk of La Germania, the subbase application was monitored and the test taking was also supervised, the tying of steels for strings and footprints was supervised and the density and humidity tests were taken. A French filter, it should be noted that the construction steps mentioned above were supervised and approved by the mayor's office. Keywords: concrete, footprint plate, ditches, cyclopean.